Wastewater Treatment Systems - How do they work?

If your home or business is not connected to a central sewer system, you will need an onsite wastewater treatment system. All your household wastewater will be collected and treated on the spot (on site).

How A Septic Tank Works

All onsite wastewater treatment systems start with an underground septic tank that receives the wastewater from the house. There, the raw waste naturally separates into settled solids, floating material, and liquid effluent - a process called primary treatment.

Primary wastewater treatment is a passive and very reliable process. It provides 70% of the necessary wastewater treatment with no energy input. As long as the tank is watertight, the solids remain in the tank for years, while micro-organisms slowly break them down to a fraction of their volume. Every 8-12 years, the remaining solids are pumped out of the tank by a service provider

Innoflow's AdvanTex® Wastewater Treatment System

The Innoflow AdvanTex® system begins with primary wastewater treatment, then uses a packed bed reactor (textile filter) to treat to advanced level. The effluent enters the primary tank, the liquid level moves through the biotube filter and is pumped over the packed bed reactor/textile filter, this is where the treatment takes place.The cleaned effluent is then gravity fed into the treated effluent tank (TET tank) ready to be pumped to the disposal area. Click here to watch a short video on how the AdvanTex treatment system works

The AdvanTex® system is one of the only treatment systems that cannot disperse effluent without providing treatment first, there is no way the process can short circuit, so in the unlikely event of a system malfunction, your disposal field is protected.

To learn more about how the AdvanTex® wastewater treatment system works phone 1800 466 635 (innoflow)

 
© Innoflow Australia Pty Ltd.